1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Roff T01 New Construction Tile Adhesive (NCA) is a grey, polymer-modified cementitious adhesive for fixing regular-size, high-porosity ceramic and clay tiles, terracotta, quarry tiles and brick. It is intended for internal floor and wall application over sound cement screeds, plaster, concrete, brickwork and comparable mineral substrates. The ready-to-mix powder is combined with clean water at site and provides a practical thin-bed fixing solution for new residential and commercial construction. Pack size: 20 kg; product code: T01.
Features
Hsn code
38245090
Model number
T01
Manufacturer
Pidilite Industries
Item type name
Tile Adhesive
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Grey
Size name
20 kg
Item weight
20.0
Item weight unit of measure
kg
Are batteries included
No
Is product expirable
Yes
Specification
- Grey polymer-modified cementitious adhesive for new tile installation.
- Suitable for regular-size ceramic and clay tiles, terracotta, quarry tiles and brick.
- Designed for internal floors and walls over sound cement-based substrates.
- Ready-to-mix 20 kg powder bag; add clean water according to Roff instructions.
- Product code T01; follow the current Roff technical data sheet for preparation and application.
FAQs
1. Can I use T01 for vitrified tiles?
No. T01 is specified for regular-size, high-porosity tiles - ceramic, clay, terracotta, quarry and brick. Vitrified tiles have near-zero absorption and need an adhesive graded for them. Using a porous-tile adhesive under vitrified is one of the commonest causes of hollow tiles and debonding a year later.2. How much area does one 20 kg bag cover?
Coverage depends on trowel notch size, substrate flatness and tile size, so use the figure on the current Roff technical data sheet rather than a rule of thumb. An uneven substrate can easily double consumption, and levelling the floor first is usually cheaper than the extra adhesive it would otherwise soak up.3. Is this suitable for a bathroom floor?
It is specified for internal floors and walls, which includes bathrooms, but tile adhesive is not waterproofing. The waterproofing membrane goes on the screed before the tiles and does an entirely different job. Adhesive holds tiles down; it does not stop water reaching the slab underneath.4. Can I lay tile over existing tile with it?
T01 is specified for cement-based substrates - screed, plaster, concrete and brickwork. Tile-on-tile is a more demanding bond and calls for an adhesive graded for non-absorbent surfaces. Check the Roff range for the grade intended for that application rather than assuming T01 will hold.5. How long before I can walk on the floor?
Setting and traffic times are on the technical data sheet and vary with temperature and humidity - an adhesive bed sets faster on a May afternoon than on a January morning. Grouting is normally done after the adhesive has set, not the same day. Rushing traffic onto fresh tile is how lippage appears.6. What is the shelf life of a bag?
Cementitious adhesives are sensitive to moisture in storage. Keep bags off the floor on a pallet, under cover and away from a damp wall, and use the printed date on the bag. A bag gone lumpy has already absorbed moisture and will not develop its stated strength, however it looks once mixed.7. Is there a minimum order on adhesive?
Single bags and pallet quantities are both listed, and some pallet lines carry a stated MOQ shown against the product. For site quantities, an RFQ prices the full requirement together with a GST invoice, and contractors running several sites can settle on mobCredit terms.AI generated
Why buy from MOB
Tile adhesive is a pallet purchase timed to the day the tiler starts, and a short delivery stops the floor. MOB lists Roff by grade code so the right bag turns up, and bulk MOQ quantities go through RFQ, with mobCredit terms available to contractors.
AI generated
Professional tips
Mix only what the team can lay within the pot life printed on the bag. Adhesive that has begun to set and is then re-tempered with more water looks fine going down and hollows out under the tile within a year.
AI generated
Roff T01 New Construction Tile Adhesive (NCA), Grey, 20 kg Bag
your selected location
Professional tips
Mix only what the team can lay within the pot life printed on the bag. Adhesive that has begun to set and is then re-tempered with more water looks fine going down and hollows out under the tile within a year.
AI generated
2026 by Madoverbuilding AI Private Limited
