• Dr. Fixit 201 Crack-X Paste Ready-to-Use Internal & External Plaster Crack Filler, 500 g - image 1
  • Dr. Fixit 201 Crack-X Paste Ready-to-Use Internal & External Plaster Crack Filler, 500 g - image 2
Dr. Fixit 201 Crack-X Paste Ready-to-Use Internal & External Plaster Crack Filler, 500 g
Toggle section

Product details

Dr. Fixit 201 Crack-X Paste is a ready-to-use, fibre-reinforced polymer-modified acrylic crack filler for non-structural cracks in internal and external plaster. It is formulated to adhere to prepared cementitious surfaces and provides a flexible, water-resistant fill that can be finished before repainting. It is intended for plaster cracks up to 5 mm wide, subject to the preparation and application limits in the product data sheet. This 500 g pack is convenient for repair and renovation work. Structural, continuously moving or actively leaking cracks should be assessed and treated with an appropriate repair system instead of ordinary crack-filling paste.
Toggle section

Features

Hsn code
38244010
Model number
201.0
Manufacturer
Pidilite Industries Limited
Item type name
Crack Filler Paste
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Size name
500 g
Item weight
500.0
Item weight unit of measure
gr
Are batteries included
No
Is product expirable
Yes
Toggle section

Specification

  • Ready-to-use acrylic paste for non-structural internal and external plaster cracks
  • Fibre-reinforced formulation provides adhesion and flexibility on prepared cementitious surfaces
  • Suitable for filling plaster cracks up to 5 mm wide as specified by the manufacturer
  • Water-resistant cured fill can be finished before the compatible repainting system
  • Pack size: 500 g; not intended as a repair for structural or continuously moving cracks
Toggle section

FAQs

1. Can it be used in external plaster?

Where the product lists external plaster among its applications, yes, and it is often used on weather-facing walls where driving rain would otherwise soak the plaster. Masons generally notice the improved workability before anyone notices the effect on water.

2. How should containers be stored?

Sealed, out of direct sun and off a hot roof. Liquid admixtures are water-based and suffer from prolonged heat. Once opened, reseal tightly, because a partly used container left open thickens and the dosage you measure out afterwards is no longer what the label describes.

3. Can I order this with cement and other materials together?

Materials from different categories go on one order and one GST invoice. For a slab pour where cement, admixture and the rest have to land together, an RFQ lets the whole requirement be scheduled as a single delivery rather than three separate arrivals.

4. Why does a treated roof still leak?

Almost always detailing rather than the product. Water finds junctions, parapet upstands, drain outlets and cracks around penetrations. A slab treated in the middle and detailed poorly at the edges leaks exactly where it was always going to leak, whatever went into the mix.

5. What is the difference between a coating and an admixture?

A coating forms a film on a finished surface, which works until it is punctured or worn. An admixture reduces permeability from inside the concrete, so there is no film to fail. Serious waterproofing usually uses both, each doing the job it is suited to.

6. Is this a coating I paint on?

Integral compounds are not. They go into the mixing water for concrete, mortar or plaster before it is laid. If you need something applied onto an existing finished surface, that is a different category, a coating or a membrane, and an admixture will not do that job.

7. How much do I add per bag of cement?

Follow the dosage on the pack and in the manufacturer's current literature. Admixtures are dosed against cement content, and exceeding the recommended dose does not make concrete more waterproof; it can affect setting and strength. This is not a material to estimate by eye.
Toggle section

Why buy from MOB

MOB lists the 201 Crack-X Paste Ready-to-Use Internal & with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
Brand: Dr. Fixit|MOBSKU: 586QWI113

Dr. Fixit 201 Crack-X Paste Ready-to-Use Internal & External Plaster Crack Filler, 500 g

Rating Star4.6
weight:500.0 gr
Delivery details
your selected location
Not deliverable at your location
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Keep containers sealed, out of direct sun and off a hot roof. Once opened, reseal tightly, because a partly used container left open thickens and the dosage you measure is no longer what you think.